Licensed plumbers, same-day installs, and haul-away included

Water Heater Installation Littleton CO Done Right the First Time

When your water heater fails, you need hot water back fast. Our water heater installation Littleton CO service covers tank and tankless replacements, code-compliant hookups, and old-unit haul-away. We serve homeowners across Arapahoe County with upfront pricing and workmanship you can count on. Call today and we will get your new unit running the same day.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Water Heater Installation in Littleton, Colorado
Careful work. Honest options.
About this service

Water Heater Installation Littleton CO You Can Trust

Water heater installation Littleton CO is the licensed removal and replacement of a residential water heater, including the tank, fittings, venting, and code-required safety components. We drain the old unit, disconnect gas or electrical lines, install your new heater with copper pipe or PEX tubing, and pressure-test every connection before we leave. Whether you choose a 40-gallon tank or a high-efficiency Navien tankless model, the job is done to Uniform Plumbing Code standards.

Most Littleton homes we service were built between the 1950s and 1990s, and many still run original or second-generation tanks. When a 12-year-old unit starts leaking at the base or rumbling like a kettle, replacement beats repair every time. We handle water heater replacement in Littleton, Colorado for families in Ken Caryl, Columbine Valley, and Downtown Littleton, often finishing within three to four hours so you are not without hot water overnight.

  • ✓ Lower Monthly Energy Bills
  • ✓ Same-Day Hot Water Restored
  • ✓ Code-Compliant Safety
  • ✓ Old Unit Hauled Away
What's included

What Our Water Heater Installation Includes

Every installation covers the full job: removal, new unit, code-required components, testing, and cleanup. We do not nickel-and-dime you for fittings or haul-away. Here is what is included when we install your new water heater.

✓

Old Unit Removal and Haul-Away

We drain the old tank, disconnect the gas or electrical, and remove it from your home. The tank and metal components get recycled. You do not need to schedule a separate pickup or haul it to the curb. This is included in every install at no extra charge.

✓

New Water Heater Supply

We supply Rheem, AO Smith, Bradford White, Navien, or Rinnai units depending on your needs and budget. Tanks come with a manufacturer warranty on the tank and parts. We register the warranty for you so you have documentation if you ever need service.

✓

Code-Required Safety Components

Every install includes a new temperature and pressure relief valve, expansion tank where local code requires it, and proper venting per International Plumbing Code. We check gas connections with leak detection equipment and verify flue draft on gas units before we leave.

✓

Water Line and Fitting Connections

We connect your new heater using copper pipe or PEX tubing with new fittings, solder, and Teflon tape. If your existing shutoff valve is seized or the supply lines are corroded, we replace them. Flexible connectors are used where code allows for easier future service.

✓

Testing and Temperature Calibration

We fill the tank, bleed air from the lines, and check every fitting with a pressure gauge. The thermostat gets set to 120 degrees Fahrenheit for safety and efficiency. You get a walkthrough of the shutoff location and basic maintenance before we leave.

✓

Permit and Inspection Coordination

When Arapahoe County requires a permit for water heater replacement, we pull it and schedule the inspection. We meet the inspector on site so you do not have to take time off work. Passing inspection protects your warranty and your home insurance coverage.

How it works

Our Water Heater Installation Process

01

Phone Assessment

Call us and describe what is happening: leaking tank, no hot water, rusty water, or a unit older than 10 years. We ask about your current heater size, fuel type, and household demand. Within minutes we give you a ballpark range and schedule a visit, often the same day.

02

On-Site Evaluation

A licensed plumber inspects your current setup, measures the space, checks gas line sizing or electrical amperage, and confirms venting options. We walk you through tank versus tankless choices and give you a firm price before any work starts. No surprises, no pressure.

03

Removal and Prep

We shut off the water and gas or power, drain the old tank with a hose, and disconnect the supply lines. If the shutoff valve is seized or the fittings are corroded, we replace them. The area gets prepped so the new unit sits level and meets clearance requirements.

04

New Unit Installation

We set the new heater, connect gas or electrical, solder or crimp the water lines, install the T&P valve and expansion tank, and run the venting to code. A typical 50 gallon water heater installation Littleton Colorado job takes two to four hours from start to finish.

05

Testing and Walkthrough

We fill the tank, bleed the lines, check every fitting with a pressure gauge, and fire the burner or restore power. You get a walkthrough of the temperature setting, the shutoff location, and basic maintenance. We haul away the old unit and leave the space clean.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Pipe Wrench

Used to loosen and tighten threaded gas and water connections. We carry multiple sizes to handle everything from half-inch supply lines to one-inch gas mains without damaging fittings.

Soldering Torch

For copper pipe connections. We sweat new fittings and adapters to ensure leak-free joints that meet Uniform Plumbing Code. Every solder joint gets pressure-tested before we leave.

PEX Crimping Tool

Used to secure PEX tubing connections with crimp rings. PEX is flexible, resists freeze damage, and is faster to install than copper in tight utility closets common in Littleton homes.

Tube Cutter

Cuts copper and PEX tubing cleanly and squarely. A square cut is essential for a proper seal. We use a fresh cutting wheel on every job to avoid burrs that cause leaks.

Pressure Gauge

Checks water pressure and tests for leaks after installation. We verify your home's pressure is between 40 and 60 psi. High pressure shortens water heater life, so we install a pressure-reducing valve if needed.

Leak Detection Equipment

Electronic sensors and moisture meters that find hidden leaks around the water heater, supply lines, and floor. Catching a slow leak early prevents water damage and mold growth.

Pipe Camera Inspection System

A camera on a flexible rod that lets us inspect the inside of pipes and venting. We use it to check for blockages, corrosion, or improper venting before and after installation.

Real results

Before and after.

12-Year-Old Tank Replaced in Ken Caryl

Before

A family of five in Ken Caryl had a 12-year-old 50-gallon tank that was leaking at the base and running out of hot water by the third shower. The utility closet was cramped, and the shutoff valve was seized.

After

We installed a new 75-gallon Rheem unit with a fresh shutoff valve and expansion tank. The install took four hours. The family now has enough hot water for five showers back-to-back, and the leaking tank is gone.

Tankless Conversion in Historic Downtown Littleton

Before

A couple in a 1920s bungalow had a failing 40-gallon tank in a closet off the kitchen. They wanted endless hot water and more storage space. The gas line was undersized for a tankless unit, and venting had to be rerouted.

After

We installed a Navien tankless unit on an exterior wall, upsized the gas line to three-quarter inch, and ran new PVC venting. The closet is now used for pantry storage. The couple has endless hot water and a lower gas bill.

Emergency Same-Day Install in Governor's Ranch

Before

A homeowner called at 7 a.m. on a Saturday with water pooling around the water heater. The tank had rusted through and was actively leaking. They had guests arriving that afternoon and needed hot water fast.

After

We arrived by 9 a.m. with a 50-gallon AO Smith tank on the truck. By 1 p.m. the new unit was installed, tested, and running. The old tank was hauled away, and the floor was dried. The homeowner had hot water before the guests arrived.

Problems we solve

Water Heater Problems We Solve in Littleton

A failing water heater gives you warning signs before it dies completely. Here are the most common problems we see and how we fix them.

Ask a pro →
01

Leaking tank or puddle under the heater

We shut off the water, drain the tank, and inspect the source. If the tank is compromised, we install a new unit the same day. We also check for slab leaks and supply line issues so your new heater does not sit in water.

↗
02

No hot water or water that runs cold quickly

We diagnose the issue on site. If the unit is under eight years old, we often repair it. If it is older or the tank is compromised, we walk you through replacement options and install a new unit that day.

↗
03

Rusty or metallic-smelling hot water

We inspect the anode rod and tank interior. If corrosion is advanced, we replace the heater with a new unit and flush your lines. If the tank is still sound, we replace the anode rod and flush the sediment to extend its life.

↗
04

Popping, rumbling, or banging noises

We flush the tank to remove sediment and check the heating elements or burner. If the buildup is severe or the tank is near end of life, we recommend replacement. A new energy efficient water heater installation Littleton homeowners choose will run quieter and cost less to operate.

↗
Transparent pricing

Water Heater Installation Cost in Littleton

$1,200 - $5,500 depending on tank size, fuel type, and whether it is a tank or tankless install

Typical 2026 pricing in Littleton runs $1,200 to $2,400 for a standard tank replacement and $3,200 to $5,500 for a tankless conversion. The final price depends on tank size, fuel type, venting, and whether code upgrades are needed. We give you a firm quote before work starts, and that price includes haul-away of the old unit. No hourly billing, no surprise charges for fittings. Our water heater installation services Littleton CO customers rely on are priced upfront so you know exactly what you are paying.

A new water heater lasts 10 to 15 years and cuts energy waste from day one. Financing the upfront cost over its lifespan works out to pennies a day for reliable hot water and no emergency repairs.

01Tank Size and Type

A 40-gallon tank costs less than a 75-gallon unit. Tankless units cost more upfront because of the unit price and the venting and gas line work required. We help you size correctly so you do not pay for capacity you do not need.

03Venting and Gas Line Work

If your existing venting does not meet code or your gas line is undersized, we upgrade it. Tankless conversions almost always need new PVC venting and a larger gas line. We include this in the quote so there are no surprises.

04Code Upgrades

Expansion tanks, new shutoff valves, and T&P relief valves are often required by current code. If your old setup does not have them, we add them during installation. These are safety items, not upsells, and we explain why each is needed.

Proof you can check

Licensed, Insured, and Warrantied

✓
Colorado Master Plumber LicenseState of Colorado
✓
Colorado Journeyman Plumber LicenseState of Colorado
✓
Backflow Prevention CertificationState of Colorado
✓
EPA Lead-Safe CertificationU.S. Environmental Protection Agency
✓
OSHA Safety CertificationOccupational Safety and Health Administration
Customer reviews

What Littleton Homeowners Say

★★★★★
“Our 12-year-old water heater started leaking on a Friday morning. I called at 8 a.m. and had a new 50-gallon Rheem installed by 1 p.m. The plumber showed me the old tank was rusted through at the base, gave me a firm price before starting, and hauled everything away. No mess, no surprises. Hot water was back the same day.”
MR

Mark R.Homeowner, Ken Caryl

✓ Verified
★★★★★
“I called about a water heater replacement in Littleton and got a quote over the phone that matched the final invoice exactly. The plumber noticed our shutoff valve was seized and replaced it without charging extra. He also checked the expansion tank and venting, which the last company never did. Clean work, licensed, and they cleaned up after themselves.”
DK

Dave K.Homeowner, Governor's Ranch

✓ Verified
Good questions

Frequently Asked Questions

+1 (831) 293-1204

Most standard tank replacements in Littleton run $1,200 to $2,400 installed, depending on tank size, fuel type, and whether code upgrades are needed. Tankless units typically run $3,200 to $5,500 because of venting and gas line modifications. We give you a firm quote before any work begins, and that price includes haul-away of the old unit.

A standard tank swap takes two to four hours from arrival to hot water. Tankless conversions run four to six hours because we often need to upsize the gas line and run new PVC venting. If your shutoff valve is seized or the venting needs rework, add an hour. We schedule morning installs so you have hot water by evening.

For a household of one to two people, a 40-gallon tank works. Three to four people need a 50-gallon. Five or more, or a home with a large soaking tub, calls for a 75-gallon tank or a tankless unit sized to your flow rate. We measure your peak demand and check your gas meter capacity before recommending a size.

Yes. We drain, disconnect, and remove your old heater as part of every installation. There is no extra charge for haul-away, and we recycle the tank and metal components. You do not need to schedule a separate pickup or haul it to the curb. We take it with us when we leave.

Ready when you are

Get Your Water Heater Installation Littleton CO Scheduled Today

Licensed plumbers, same-day installs, and upfront pricing. We stock 40, 50, and 75-gallon tanks on our trucks and answer calls 24/7. Call now and we will get hot water back in your home today.

Schedule Your Install +1 (831) 293-1204 →
Request an appointment

Contact Us Today

Call us at +1 (831) 293-1204 or email info@plumberlittleton.com to schedule service or ask a question. We answer the phone 24/7 for emergencies and book same-day appointments during regular hours. If you are in Littleton or anywhere in Arapahoe County, we can get a plumber to your door fast.

Request received — our team will be in touch shortly.
Tap to call+1 (831) 293-1204